Atlas USB

A metal dual-headed pivot drive with USB-A and USB-C, and a swivel that locks at every 90 degrees.

Request a quote

✓ Capacities from 8GB to 256GB
✓ 1 body colours, Pantone-matched on request
✓ 3 branding methods available
✓ Free digital mock-up

Capacity 8GB

USB Version USB 2.0

Body Colour Silver

Branding Method Screen Print

Packaging Polybag (included)

Quantity

Add To Quote →

Minimum order 50 units

Description

The Atlas USB has a metal alloy casing with USB-A at one end and USB-C at the other, and a metal swivel that locks at each 90 degree turn to cover whichever connector you are not using. At 67 x 16 x 10mm it gives a generous branding surface for a dual drive.

Print your logo in full colour or spot colours, or laser engrave it, across 35 x 15mm on each side. Capacities run from 8GB to 256GB. Send us your artwork and we will return a quote and a visual.

Specification

Capacities	8GB · 16GB · 32GB · 64GB · 128GB · 256GB
Connectors	USB-A and USB-C
Capacities	8GB to 256GB
Size	67 x 16 x 10mm
Material	metal alloy casing, metal swivel
Colour	silver
Print area	35 x 15mm, front and back
Branding	full colour digital, 1 to 4 colour print, laser engraving
Dimensions	67 x 16 x 10mm
Print Area	Front and back: 35 x 15 mm

Body Colours	1 standard, Pantone-matched on request
Branding	3 methods, free proof before production
Lead Time	Confirmed with your quote

Click here to download the Atlas USB Spec Sheet

Find USB Makers useful? Make USB Makers a Preferred Source on Google.

Branding

How to brand your Atlas USB

Every method is colour-matched to your brand references and signed off on a free proof before production.

The right branding method depends on your artwork, your budget and the surface of the product itself. Screen printing keeps bold spot-colour logos sharp and cost-effective on larger runs, while digital UV printing reproduces full-colour artwork, gradients and photographic detail in a single pass. Pad printing reaches the curved and recessed surfaces that flat methods cannot, and laser engraving burns your logo permanently into metal and wood for a premium, understated finish that never rubs away.

Foil stamping adds a metallic accent for luxury gifting, and epoxy dome resin seals a printed logo beneath a glossy, raised lens. Not every method suits every product, so your Dedicated Account Manager will recommend the best match for your artwork, your deadline and your quantity, with Pantone colour matching available whenever brand accuracy matters.

Whichever method you choose, nothing goes to production until you approve it. Our design team prepares a free visual proof showing your logo in position at the correct size, and we are happy to make amendments until it is exactly right. If you are preparing files, our artwork guidelines set out the formats our studio works with.