Wooden Stick - Type-C

A solid wood USB-C drive in bamboo, pine or walnut, with a magnetic snap-on cap.

Request a quote

✓ Capacities from 8GB to 256GB
✓ 2 body colours, Pantone-matched on request
✓ 3 branding methods available
✓ Free digital mock-up

Capacity 8GB

USB Version USB 2.0

Body Colour Dark Wood

Branding Method Screen Print

Packaging Polybag (included)

Quantity

Add To Quote →

Minimum order 50 units

Description

The Wooden Stick Type-C has a solid wood body in natural bamboo, pine or walnut, so every drive has its own grain. A magnetic cap snaps over the USB-C connector, and the drive measures 60 x 20 x 10mm.

Laser engraving shows the wood grain beautifully, and full colour or spot colour printing is also available. There is room for 40 x 14mm on each side and 14 x 8mm on the cap. Capacities run from 8GB to 256GB. Tell us your quantity and we will prepare a quote and a visual.

Specification

Capacities	8GB · 16GB · 32GB · 64GB · 128GB · 256GB
Connector	USB-C
Interface	USB 3.1
Capacities	8GB to 256GB
Size	60 x 20 x 10mm
Material	solid wood (bamboo, pine or walnut)
Cap	magnetic
Print area	40 x 14mm front and back, 14 x 8mm cap
Branding	laser engraving, full colour digital, 1 to 4 colour print
Dimensions	60 x 20 x 10mm
Print Area	Front and back: 40 x 14 mm; cap: 14 x 8 mm

Body Colours	2 standard, Pantone-matched on request
Branding	3 methods, free proof before production
Lead Time	Confirmed with your quote

Click here to download the Wooden Stick - Type-C Spec Sheet

Find USB Makers useful? Make USB Makers a Preferred Source on Google.

Branding

How to brand your Wooden Stick - Type-C

Every method is colour-matched to your brand references and signed off on a free proof before production.

The right branding method depends on your artwork, your budget and the surface of the product itself. Screen printing keeps bold spot-colour logos sharp and cost-effective on larger runs, while digital UV printing reproduces full-colour artwork, gradients and photographic detail in a single pass. Pad printing reaches the curved and recessed surfaces that flat methods cannot, and laser engraving burns your logo permanently into metal and wood for a premium, understated finish that never rubs away.

Foil stamping adds a metallic accent for luxury gifting, and epoxy dome resin seals a printed logo beneath a glossy, raised lens. Not every method suits every product, so your Dedicated Account Manager will recommend the best match for your artwork, your deadline and your quantity, with Pantone colour matching available whenever brand accuracy matters.

Whichever method you choose, nothing goes to production until you approve it. Our design team prepares a free visual proof showing your logo in position at the correct size, and we are happy to make amendments until it is exactly right. If you are preparing files, our artwork guidelines set out the formats our studio works with.